TG455 Tonax coax tone generator
 
 
The field-proven Tonax™ TG455 Coax Tone Generator is optimized to tone on coaxial cable systems as well as for phone and data cabling. The compact and rugged Tonax includes a high-power tone generator mode that enables tracing through ungrounded splitters or to equipment as well as tracing terminated or shorted coax cable. Probe mode is used for conventional tone tracing. The low-power tone generator mode supplies tone voltage and current comparable to common tone generators. The POTS simulator mode supports line voltage, line current, and dial tone functions with a talk battery performance that performs better than common tone generators.
Datacom contractors, telco installation and maintenance technicians, enterprise technicians, and cable installers and contractors alike value the tone strength, ability to tone and trace through splitters, multiple interfaces (phone, data, and coax), and generous talk battery capability of Tonax.
 
Features
 
l Tone and trace coax cable through splitters, wire shorts, and terminated cable to active components
l Built-in F-connector for coax cable
l Three tone outputs
l POTS line simulator
l Status indicators for off-hook and shorts
l Constant output in all modes for the life of the battery
l Auto-off in any mode
l Applications:
 - Trace and troubleshoot wires in a home, business, or MDU complex.
 - Tone trace for triple-play installations, home theater, security, multi-room audio, satellite, and phone systems.
 - Locate wires lost in a wall
 - Trace coax runs in a daisy chain, through splitters, or in shorted cables.
 - Check continuity of a circuit
TG455 Package Contents:
1 TG31
1 TG32
1 Pouch
Specifications
Power requirements: 1 pc. 9V alkaline battery
Battery life Alkaline, 540 mA-hr):  
 - Times for exclusive use in (typical): Standby mode: 2 yrs
 

POTS simulator, on hook 40 hrs

  POTS simulator, off hook 8 hrs
 

Tone mode, Probe mode 27 hrs
Tone mode, Coil mode 13 hrs

Physical Dimensions: 11.4 x 4.4 x 3.3 cm
(4.5 x 1.75 x 1.3 in)
Weight: 142 gm (5 oz) with battery
POTS simulator: On-hook voltage: 20 V DC nominal
  Off-hook current (standard 430Ωload): 21 mA nominal
  Dial tone (into 600Ω): –21 dBm
Output terminals withstanding voltage:

Tone modes 250 V peak AC or DC
POTS simulator 25 V peak AC or DC
POTS line, protection device will operate

Tone generator (Constant output from new battery to 5.4 V): Tone frequencies (±1%)
- Dual 977 and 814 Hz
- Single 977 Hz
High power: Probe mode
- Tone voltage, typical (open circuit) 20 V p-p
- Tone power, typical (into 600Ω) 18 dBM
  Coil mode
- Tone current, typical (into 75Ω) 400 mA p-p
- Tone power, typical (into 75Ω) 280 mW
Low power:

Probe mode
- Tone voltage, typical (open circuit) 5V p-p
- Tone power, typical (into 600Ω) 6 dBm

Qualified: CE, RoHS and WEEE