|
|
|
TP650 TestifierPRO cable tester |
| |
 |
| |
|
The TP650 TestifierPRO Cable Tester provides telecom,
datacom, and cable installers and technicians with cable test,
length measurement, and hub blink functions in one unit. The
easy-to-use TP650 TestifierPRO cable tester requires one-button
operation to initiate telco, network, and coax modes for
diagnostic tests and results. The main unit includes built-in
RJ12 and RJ45 jacks for testing six-wire and eight-wire twisted
pair and F-connector for testing coax. An integrated remote bay
houses a detachable test remote with built-in jacks for testing
twisted pair cable terminated with RJ12 or RJ45 connectors.
The field-proven TP650 TestifierPRO performs detailed analysis to
detect miswire, no connection, short, high-resistance fault, and
split pair conditions when used with remote identifiers. It also
tests and reports on shorts, opens, and split pairs conducted
without a remote. The MAP ID function identifies multiple cables
by displaying ID numbers of map-only remotes. The TP650
TestifierPRO cable
tester measures cable length and displays PASS icon for
correctly wired T568A/B and six-pin cable. Tone generator mode
sends any of four user-selectable tones on all pin and pair
combinations. |
| |
|
Features |
| |
|
l |
Hub blink mode sends link pulses to network
switch to blink port LED |
|
l |
Measures cable length using patented cable
capacitance method |
|
l |
Displays single-ended test results in wiremap
format for opens, shorts, and split pairs |
|
l |
Tests and displays in wiremap format shorts,
opens, miswires, reversals, and split pairs with remotes |
|
l |
Two-line, 16-character, back-lit, full
alphanumeric LCD with icon flags |
|
l |
Auto-off and timed backlight in any mode for low
power consumption and long battery life |
|
l |
Application:
- Installation, troubleshooting, and maintenance on telco, network, or
coax cable
- Identify switch port LED where network cable is terminated
- Measure cable length
- Determine wiring condition
- Identify up to 20 telco, network, or coax cable runs at a time
- Find and fix position of exposed or hidden cable |
|
|
|
TP650 Package Contents: |
|
1 |
TP650 Main unit |
|
1 |
TP65 Replacement #1 Coax Remote Identifier for Resi Testertm |
|
1 |
TP40 12” Cable Ass RJ45 alligator clip |
|
2 |
TP55 12” Cable Ass
shielded, RJ45 |
|
1 |
Pouch |
|
1 |
Manual |
|
|
|
TP650 Accessories: |
|
l |
TP40: 12in. Cable
Assembly, RJ45/alligator clips |
|
l |
TP55 12” Cable Ass shielded, RJ45 |
|
l |
KP420 Master Wiremapping Kit |
|
l |
TP310 Set of 10 Resi Testertm Coax Remote Identifiers |
|
l |
TP311
Set of 20 Coax remote
identifiers for Resi Testertm |
|
l |
TP312 Set of 20 RJ45 Wiremappers for Resi Testertm |
|
l |
TP314 Set of 20 RJ12 Wiremappers for Resi Testertm |
|
l |
TP315 Set of 20 Speaker remotes |
|
|
Specifications |
|
| Cable types: |
Shielded or unshielded, CAT6, CAT5E, CAT5,
CAT4, CAT3, and Coax |
| Minimum cable
length for testing for split pairs: |
0.91 m (3 ft) |
| Minimum cable
length for PRETEST: |
1.22 m (4 ft) |
| Length
measurement range: |
(CAT5/6): 0 to
610 meters (0 to 2000 feet) |
| |
Coax cable:
100Ωmaximum DC resistance, center conductor plus shield |
|
Battery life: |
Battery life (based on a typical 9 V
Alkaline battery) is for the full capacity of the battery
used continuously in one of the following modes (batteries
not included) |
| |
Standby: 2.5 yrs
Cable testing: 80 hrs (with backlight off) |
| Operating
temperature: |
0 to 50°C (32 to
122°F) |
| Storage
temperature: |
-10 to 60°C (14
to 140°F) |
| Humidity: |
10% to 90%,
non-condensing |
|
Size - (Excluding F-connector): |
3.3 x 6.7 x 15.7
cm (1.3 x 2.6 x 6.2 in) |
|
- (Including F-connector): |
3.3 x 6.7 x 16.8
cm (1.3 x 2.6 x 6.6 in) |
|
Weight: |
235.3 g (8.3 oz)
with battery and remote |
| Qualified: |
CE, RoHS and
WEEE |
|
|
|
|
