|
|
NT955 ValidatorNTtm
Management Tool |
| |
 |
| |
|
The NT955 Validator-NTtm Ethernet System All-in-One
Network Management Tool can certify and maintain active
networks. Other new possibilities are as follows: Identify,
configuration, documentation, VoIP controls. This tester
identifies: POTS, Ethernet, ISDN, Token Ring etc. Also new to
this device is the extensive configuration function. The special
aspect of the new documentation is that it can be imported into
Visio or AutoCAD. The NT955 Validator-NTtm
measures and presents fast and clear
SPEED and
PERFORMANCE CERTIFICATION
of networks until Cat 6 up to 1 gigabit. This can be done in 4
steps. First a map of building which all connections are made.
The NT955 measures all the connections and the measurement data
will be stored using a flash card of the unit. And all data will
be read on the computer using the software. These are the wiring
order, split pairs, open ends, shorts and miswires, length
and distance to short circuits and open ends, NEXT, return loss,
attenuation, channel response,
Signal to Noise Ratio, PSACR, skew and
BERT-test.
The Plan-Umtm software ties together all the
different cable criteria that are found in complex
voice/data/video installations and presents concise information
in printed reports, while storing data for future use.
The NT1150 test interconnect specifications by TIA 568 and 570
wirings. The NT955 has a graphical
screen so that all measurements are clear to read and easy to
use. |
| |
|
Features |
| |
|
l |
NEW:
- Certification and maintain the Active Network.
- Identification.
- Configuration.
- Documentation.
- VoIP Control.
- Identifies: POTS, Ethernet, ISDN, Token Ring, etc.
- Lay-out in Visio/Autocad.
- New Network tools.
- Direct test of the performance of the cable.
- Classify the voltage on each port.
- Ethernet equipment.
- Ping tests (IP-address and website).
-
Direct URL input.
- Hub/Switch's indication.
- Search with the use of receiver (optional).
- Monitoring of speed connection. |
|
l |
Supports IEEE802.3 speed criteria up to 1 gigabit with full Bit
Error Rate Test (BERT). |
|
l |
Verifies Cat 3, 5, 5E and 6 networks. |
|
l |
Test interconnect specifications per TIA568/570. |
|
l |
Test in 4 steps:
- Location of the building.
- Check the connections.
- Reading measurement data on PC.
- Printed measurement reports. |
|
l |
Measures the following:
- Wiring order, split pairs, open ends, shorts and miswires.
- Length and distance to short circuits and open ends.
- NEXT.
- Return loss.
- Attenuation.
- Channel response.
-
Signal to Noise Ratio.
- PSACR.
- Skew.
- BERT-test. |
|
l |
Graphical LCD-screen. |
|
l |
PC software. |
|
|
|
NT955 Validator-NTtm Package Contents: |
|
1 |
NT905 Validator-NT™ |
|
1 |
NT928 Validator-NT™
Remote |
|
2 |
NT93 Battery for
Validatortm |
|
2 |
TP74 Cable for
extending modular plug |
|
1 |
TP610 Set of 8
network remote identifier |
|
2 |
TP62 Adapter F plug
to BNC jack |
|
2 |
TP20 7.5in. Cable
Assembly with Two No-Fault RJ12 Connectors |
|
2 |
TP68 24" Cable RJ45
with 8 alligator clips |
|
2 |
TP55 12" Cable Ass
shielded, RJ45 |
|
1 |
NT94 ValidatorTM
72" Cable assembly, USB |
|
1 |
0001-0278.136 Flash
card NT950/NT955 |
|
1 |
NT95 ValidatorTM
Cable Labels, Roll of 100 |
|
2 |
European AC cord
for NT950/NT955 |
|
2 |
NT92 ValidatorTM
Power Supply |
|
1 |
NT940 Plan-Umtm
design layout software |
|
1 |
NT935 Deluxe
carrying case with cushioned sides |
|
1 |
Instruction Manual |
|
|
|
Accessories for the NT955 Validator-NTtm: |
|
l |
NT92 - AC
adapter/charger unit |
|
l |
NT93 - Battery for Validatortm |
|
l |
NT935 - Validatortm Pounch |
|
l |
NT94 - 72" Cable
assembly, USB |
|
l |
NT95 - Cable Labels,
Roll of 100 |
|
l |
TP20 - 7.5" Cable
Assembly |
|
l |
TP55 - 12" Cable
Assembly, shielded, RJ45 connectors |
|
l |
TP62 - Adapter - F to
BNC |
|
l |
TP68 - 24" Cable
Assembly, RJ45 with 8 alligator clips |
|
l |
TP74 - Cable for
extending modular plug use |
|
|
Specifications |
|
| Certification
type: |
TIA568 Cat 3, 5,
5E and 6 (shielded
and unshielded),
TIA570, IEEE 802,3
to 1 gigabit |
|
Qualification: |
VoIP usable |
|
Identify port service: |
POTS, Ethernet, ISDN, Token Ring, etc. |
|
IP addresses: |
With Ping function |
|
Network test: |
Speed test, hub LED blink, ping routers and
DNS server, DHCP and manual addressing, identification hub,
NIC or auto MDI/MDI-X device |
|
Voltage measurements: |
Line voltage, phantom power hub/switch |
| Measuring: |
Wiring order, split pairs, open
ends, shorts and miswires.
Length and distance to short circuits and open ends.
NEXT.
Return loss.
Attenuation.
Channel response.
Signal to Noise Ratio.
PSACR.
Skew.
BERT-test. |
| Cable types: |
Network, phone,
coax,
loudspeaker, security,
fire security and alarm |
| Test
connections: |
1 x RJ45
(shielded)
1 x RJ12
1 x f connector
2 x banana connector |
|
Speed
cabletest: |
With BERT
test and Auto save ON:
-
CAT5UTP: 36 Sec.
- CAT5EUTP: 39 Sec.
- CAT6UTP: 37 Sec. |
| |
With BERT test and Auto save
OFF
-
CAT5UTP: 35 Sec.
-
CAT5EUTP: 38 Sec.
-
CAT6UTP: 37 Sec. |
| |
Without
BERT test
- CAT5UTP: 20 Sec.
- CAT5EUTP: 18 Sec.
- CAT6UTP: 20 Sec. |
| Graphic display: |
LCD-display 256
colours |
| Keyboard: |
Alphanumeric
with some additional Buttons |
| Input/output: |
RS-232
connection
USB connection
64MB compact flash card
input Power-supply-adapter connection |
| Control-system
sender: |
Linux |
| Power
requirements: |
Lithium ion
accu's (rechargeable) |
| Physical sender: |
Length: 229 mm,
Width:
114 mm,
Height: 53 mm,
Weight 710 grams |
| Physical
receiver: |
Length: 142 mm,
Width:
112 mm,
Height: 44 mm,
Weight 341 grams |
| Temperature: |
Use: 0 to 50°C;
Storage: -20 to 70°C |
| Relative air
humidity: |
10% up to 85% |
| Software and
Firmware languages: |
English, French,
German, Italian, Portuguese, Chinese and Spanish |
| Qualified:
|
CE, RoHS and
WEEE |
|
|
|
|
