|
|
NT700 LanScapertm
Network Tester |
| |
 |
| |
|
The new LanScapertm Network Tester is the first in a
new line of Physical Layer Network Management Devices.
This instrument measure the voltage by PoE, for example by VoIP
telephones. The LanScapertm combines the functions of a high-end cable tester
and length measurement device with the capability to monitor and
correct network problems connected with the physical layer and
link conditions of the network. |
| |
|
Features |
| |
|
NT700 LanScapertm Features: |
|
l |
Identifies port services like Ethernet, ISDN, POTS and
Token-Ring while reporting such crucial information as network
speed, capability and location of switches and other network
devices. |
|
l |
|
|
l |
Pinging function verifies connectivity to network devices and
queries PC/NIC's. |
|
l |
Detects legacy "Phantom Power", reports current and voltage
capability of analog telephone lines, identifies (maps) remotes
while cable testing. |
|
l |
Conducts link tests to ID speed. |
|
l |
Verifies functional speed capability of terminated unconnected
cable runs by sampling data packets between two LanScapertm
units, which exercises the run and reports the result. |
|
l |
Automatically accesses DHCP host and obtains network information. |
|
l |
Tests cabling configuration and verifies connectivity and length
of run while conducting tests for opens, shorts, miswires, split
pairs, and reversals. |
|
l |
Identifies HUBs, NIC, or auto MDI/MDI-X devices. |
|
l |
Blinks HUBs to ascertain connected configuration. |
|
l |
Displays advertised network speed/duplex. |
|
l |
Measures and reports any voltage on lines. |
|
l |
Wiremaps network connections with remote identifiers. |
|
l |
Generates multiple tone levels for signal tracing and cable
identification. |
|
l |
Two line by 16 character full alphanumeric backlit LCD with
icons for clear test results. |
|
l |
Auto-off in any mode and low power consumption for long battery
life. |
|
|
|
NT700 LanScapertm Package Contents: |
|
1 |
NT700
LanScapertm Network Tester |
|
1 |
TP609 #1 Replacement
Remote Identifier for LanScaper and LanRoamerPRO |
|
2 |
TP40 12" Cable
Assembly, RJ45 alligator clip |
|
2 |
TP55 12" Cable
Assembly shielded, RJ45 |
|
2 |
TP20 7.5in. Cable
Assembly with Two no-fault RJ12 connectors |
|
1 |
PC150 Cordura Pouch |
|
1 |
Instruction Manual |
|
|
|
Accessories for the NT700 LanScapertm: |
|
l |
TP50 - RJ45 to F Coax
Adapter, 1 piece |
|
l |
TP40 - 12", RJ45 to
alligator clip set |
|
l |
TP609 - #1
remote identifier |
|
l |
TP608 - Set of 7
network remote identifiers |
|
l |
TP68 - 24", RJ45 with 8 alligator clips |
|
|
|
Associated Kits with the NT700 LanScapertm: |
|
l |
NT750 LanScapertm Network Testing Kit |
|
|
Specifications |
|
|
Arranged for: |
Ethernet, ISDN, analogous, token ring |
|
Cable types: |
Shielded and unshielded twisted pair, coax |
|
Wiring tests: |
Split pair, opens, shorts, miswires and reversals |
|
Minimum cable length: |
Split pair: 1 meter, Single
ended cable test: 1.25 meter |
|
Maximum cable length cat 5/6: |
457
meters |
|
Identification: |
Telecom wiring PTT standard 88 and ISDN date wiring 100 Base-Tx, Token ring |
|
Network testing: |
Speed, flash link LED mode sends tone while blinking a link
indicator to find a HUB or switch port ,To ping a router and DNS server, DHCP and
manual
addressing, identification hub, NIC or auto MDI/mdi-X |
|
Voltage measuring: |
Line
voltage, phantom voltage hub/switch |
| Tone
generator: |
4
Different tones. Tone is selected for a wire, reversal or
for all reversals |
|
Keyboard: |
8
Buttons |
|
LCD-display: |
2 x
16 Characters (lighted) |
|
Identification number loop-back & adapter: |
1 |
|
Connection: |
Sender: RJ45 f, workplace & loop-back & adapter: RJ45 f |
|
Physical: |
Length:
150 mm,
Width: 74 mm,
Height: 32 mm,
Weight 200 grams |
|
Alkaline battery: |
9
Volt |
|
Battery life: |
50
Hours cable tests,
15 Hours network testing |
|
Temperature: |
Use:
0 to 50°C,
Storage: -30 to 80°C |
| Air
humidity: |
10%
up to 90% |
|
Qualified: |
CE, RoHS and
WEEE |
|
|
|
|
