|
|
|
LB260-BT Ranger ABN clips boot belt clip |
| |
|
|
| |
|
The LB260-BT is an advanced, DSL-safe telephone test set for use
by datacom, telecom, and cable installers and repair
technicians. The compact test set is small enough to wear on a
belt or fit in a pocket and features a shape that is comfortable
to hold. The LCD display shows on-hook voltage, off-hook
current, and polarity as well as caller ID, call waiting caller
ID, number dialed, setup, scrolling list of stored numbers,
battery condition, and other information. Advanced features of
the LB260-BT includes DigiView™ DTMF decode, for showing and
capturing digits as dial-out is in progress; Auto Dial Line
Identification (ADLI), for inbound and outbound line
identification with caller ID testing; Trafixguard™, for sensing
digital lines and identifying under- and over-voltage
conditions; Insta-Talk™, an amplified speaker with simultaneous
intercom capability for talking while testing; andWink Detector,
for display of line reversals. |
| |
|
Features |
| |
|
l |
Provides DSL-safe operation. |
|
l |
Views and stores digits as dial-out is in
progress. |
|
l |
Identifies inbound and outbound lines. |
|
l |
Senses under- and over-voltage conditions. |
|
l |
Detects and displays caller ID and call waiting
caller ID. |
|
l |
Alphanumeric LCD with icon flags. |
|
l |
Hands-free operation even with hard hat on. |
|
l |
Eliminates popping and clicking when attaching to
a line. |
|
l |
Applications:
- POTS installation and service in the
presence of DSL.
- Temporary communication handset.
- Telephone and data line installation and
service. |
|
|
|
LB260-BT Package contents: |
|
1 |
LB260-BT Ranger ABN clips boot belt clip |
|
1 |
LB81 Lil' Buttie protection boot |
|
1 |
LB35 Deluxe Cord Set, Bed of Nails |
|
1 |
LB40B Mini Headset / Microphone |
|
1 |
Instruction Manual |
|
|
|
Accessories for the LB260-BT: |
|
l |
LB20B Cable Set Piercing Clip Blister |
|
l |
LB35 Deluxe Cord Set, Bed of Nails |
|
l |
LB10B Cable Set Alligator Clip Blister |
|
l |
LB64 4-position modtest adapter |
|
l |
LB66 6-position modtest adapter |
|
l |
LB68 8-position modtest adapter |
|
l |
LB81 Lil' Buttie protection boot |
|
|
Specifications |
|
| Interfaces |
|
| Telephone system: |
Modular telco |
| Headset: |
2.5 mm cell-phone type |
| |
|
| Ringer Equivalence |
|
| In Bell mode: |
0.0 (no ringer load) |
| |
|
| Pulse Dialing |
|
| Pulse rate: |
10 pps ±0% |
| Make/break ratio: |
40% to 60% ±2% |
| Interdigit interval: |
820 ms |
| Resistance during break: |
120 kΩ |
| |
|
| Tone Dialing |
|
| DTMF output (into 600Ω) |
|
| Tone-frequency error: |
±1.5% |
| Tone level: |
High group = -6 ±2 dB |
| |
Low group = -8 ±2 dB |
| High vs low difference: |
2 ±1 dBm |
| Flash Duration: |
600 ms ±50 ms or 100 ms ±10
ms, set at factory |
| Pause Duration: |
Tone = 3 s |
| |
Pulse = 3.4 s |
| Memory: |
Battery backed-up memory
stores eight programmed phone numbers (24 numbers ea) and
associated names (16 characters), plus last-number redial |
| Memory retention with
battery: |
>2 yrs |
| Return Loss: |
14 dB at 600 |
| Line-Current Range: |
5 to 120 mA |
| Apparent Line Resistance: |
275 at 20 mA |
| Monitor Mode Impedance: |
>230 k |
| Measurement: |
Voltage = 0 to 128 V DC ±5% |
| |
Current = 10 to 140 mA ±5% |
| User Controls: |
One left-side-mounted |
| |
TALK/BELL/MON slide switch
for operating mode |
| |
One right-side-mounted
microphone mute push button (tap to lock or hold down) |
| |
Six front-mounted push
buttons for various options |
| |
One standard, front-mounted,
12-key phone keypad |
| Indicator: |
One front-mounted, 2-line x
16-character reflective, gray-mode, super-twisted
liquid-crystal display (LCD) panel |
| Connectors: |
To telephone network = RJ12
(6-wire RJ11) female |
| |
To headset = 2.5 mm cell
phone headset jack |
| Power: |
From a 9 V DC alkaline
battery, typical: |
| |
Bell mode (timed out) = 20 μA |
| |
Talk mode = CWCID |
| |
Off 4 = mA |
| |
CWCID on = 12 mA |
| |
Monitor mode = 27 mA |
| Battery Life: |
For a typical 9 V DC, 540 mA-hr
alkaline battery: |
| |
Operating = 20 hrs (min), 112
hrs (max) |
| |
Standby = 1 yr |
| |
Typical = 25 to 40 hrs |
| Maximum altitude: |
3048 m (10,000 ft) operating |
| Temperature: |
Operating = 0 to 50° C |
| |
Storage = –20 to 60° C |
| Humidity tolerance: |
10 to 90%, non-condensing |
| Enclosure: |
High-strength ABS plastic |
| Length (w/o lanyard): |
18.4 cm. |
| Width: |
6.4 cm |
| Height: |
4.3 cm |
| Weight (with cable set): |
< 284 gm |
| Qualified: |
CE, RoHS and
WEEE |
|
|
|
|
