 |
|
Test-Um-Europe has two solutions for all computer
technicians. Direct answer if the connection is active and if the
server or router is available. The two versions have all the equipment
to test wiring. Read more about it in this newsletter! |
| |
|
Advanced wiring- and network tester! |
|
|
|
Version one: NT700 |
| |
|
|
Click on the picture for more information! |
|
| - |
Ping to a workstation, router, modem,
server, etcetera. All in all, everything where the
user has access to. |
|
- |
When there is a DHCP server, the LCD
shows if it is accessible and also the IP-address. |
| - |
The following status and
error messages will be shown while network testing: ARP received, DHCP Request Attempt/Successful, Link found, Link not found, Link Error, Lost Link, NIC init error, NIC Rx overrun, NIC Tx timeout, No IP address, Packet Rcv Error, Voltage found, Enet Pwr source found
and various Ping Test status messages. |
| - |
Checks every IP-address,
manual addressing up to 4 adjustable in advance. |
|
|
|
|
|
|
| - |
Link LED flashes when the
network link is activated. |
| - |
It also
flashes in the same rhythm as the LED on a hub, switch
or DNS server to locate a connection. |
|
This instrument identifies the following connections: |
| - |
10 Base-T, 100 Base-T
Ethernet, Half/Full Duplex and Token Ring. |
| - |
Hub, switch, NIC, auto
MID/MDI-X. |
| - |
Analog Telephone Lines
(POTS). |
| - |
ISDN-Telephone Lines. |
|
Specifications of the easy-reference LCD: |
| - |
The display has 4 lines
with a total of 64 characters. |
| - |
Several data will be
displayed at the same time. |
| - |
Backlight which can be
switched on and off. |
|
|
 |
|
|
|
|
|
 |
|
|
The tool can perform the following
wiring tests: |
|
- |
Checks if cables are connected in the
right way. |
| - |
Split pair test. |
| - |
Tests for open ends. |
|
- |
Short circuit test. |
| - |
Test cabling for miswires. |
| - |
Test the wiring for
reversals. |
|
- |
Reproduction of the wiring order on
both cable ends. |
| - |
Multiple faults will be shown
immediately. |
| - |
Length measurement up to
457 meters. Usable for permanent link and channel link. |
|
|
|
|
|
|
|
Take a look at the remaining functions: |
| - |
Voltage measuring of line
and phantom voltage on a hub or switch. |
| - |
Measures
Power over Ethernet, usable with VoIP extensions. |
| - |
Programmable internal
memory for saving the basic settings. |
| - |
Continuously battery
status indication. |
| - |
Auto-off in any mode and
low power consumption for long battery life. |
| - |
Keyboard with
8 buttons. |
| - |
This instrument can be
used with one hand, it is compact, weights just 200 grams and
is user-friendly. |
| - |
This test set contains a
solid rugged nylon pouch, remote identifier number one
and required adapter cables. |
|
|
 |
|
|
|
|
Version two: NT750 |
|
|
|
|
|
The second version is the NT750. Next to all functions of
the NT700 this test set has many more functions. This set contains a
tone tracer and a set of remotes (number 1 to 8). The NT750 will be
delivered in an practical carrying case. |
|
|
Click on the picture for more information! |
|
|
Extra functions and specifications of
the tone tracer: |
|
- |
Tone generating for quickly tracing
wrong connected cables. |
| - |
Change of tone at right
or wrong connected cables. |
| - |
Four different tones
adjustable. |
|
- |
The tone is programmable by pins,
pairs or all pairs. |
| - |
Tone traces has a volume
level control and a battery low indicator. |
| - |
It has a plug for an
optional headset. |
|
- |
The tracer is lightweight and
user-friendly. |
| - |
Designed with a 50 Hertz
filter. |
|
|
|
|
|
|
|
Functions with use of the 8 remote identifiers: |
| - |
Identify 8 cables on a
patch panel at the same time. |
| - |
All remotes
can also measure the wiring, this prevents eight times unnecessary
walking. |
| - |
Makes wire mapping very
easy, because every adapter has an own number. |
| - |
The LCD shows the remote
ID number and the wiring order at the same time. |
| - |
The connections of the 8
pins will be showed very clearly. |
| - |
This instrument gives the
possibility to keep on working. At right connected
cables the tester gives an audible indication which can
be switched on and off. The results will be displayed
also on the LCD. |
|
|
 |
|
|
|
| |
|
Interested to see the whole product line of
Test-Um-Europe? Click
here to see all the great solutions of Test-Um-Europe.
Test-Um-Europe has a broad range of high quality test equipment suitable for 6
markets; telecommunication, computer, CAI/SAT, wireless, security and for
the professional audio market. The product line
has new solutions to test,
measure and certify cables which makes testing much easier.
For questions or information please contact us at
sales@test-um-europe.com. |
| |
|
|
| Email: |
sales@test-um-europe.com |
Hunnenweg 7 |
Terms of payment and |
Rabobank |
BTW/VAT-number |
| Tel: |
00-31-342-477884 |
3781 NM Voorthuizen |
delivery published at Chamber |
36.63.12.553 |
NL121102609B01 |
| Fax: |
00-31-342-422616 |
Postbus 111 |
of Commerce Harderwijk |
Postcheque BEF |
Internet: |
| Video: |
00-31-342-477888 |
3780 BC Voorthuizen |
K.v.K. nr. 08077470 |
000-1692940-96 |
www.test-um-europe.com |
|